Chapter 50-9 REGISTERED INTERIOR DESIGNER REGISTRATION, RENEWAL AND REINSTATEMENT
Any person wishing to use the title of "registered interior designer" shall, before being styled or known as a "registered interior designer", make application to the State Board of Architects and Interior Designers and, upon being found qualified by the Board, secure therefrom a certificate of registration as a registered interior designer.
The State Board of Architects and Interior Designers shall issue certificates of registration to applicants who have been found by the Board to be qualified as registered interior designers and who have paid fees set forth in the Board's fee schedule.
|(1)||Every certificate of registration as a registered interior designer in Georgia shall expire on March 31st of each odd numbered year.|
|(2)||Without a current certificate of registration it is unlawful to use the title "registered interior designer". Neither the failure of the Board to send nor the failure of the registrant to receive an application for renewal shall excuse failure to renew a certificate of registration.|
|(3)||Every application for renewal of a certificate of registration as a registered interior designer shall be accompanied by a renewal fee set forth in the Board's fee schedule and a statement from the registrant affirming that the continuing education requirements set forth in Chapter 50-11 have been met.|
Late renewal applications submitted during the three (3) month penalty period following certificate of registration expiration, which are accompanied by a statement from the registrant affirming that the continuing education requirements set forth in Chapter 50-11 have been met, must be accompanied by a late renewal fee set forth in the Board's fee schedule.
|(1)||Certificates of registration not renewed in accordance with Rules 50-9-.03 and 50-9-.04 above shall not be subject to renewal, provided, however, that the holder thereof may apply for reinstatement.|
|(2)|| An application
for reinstatement shall be accompanied by:
|(1)||A registered interior designer holding a valid license to practice in Georgia who has retired from active practice and is no longer practicing as a registered interior designer in Georgia, may request inactive license status by filing the required application and paying the appropriate fee indicated in the fee schedule.|
|(2)||Any individual whose license is under any sanction and is not in good standing may not transfer to inactive status while sanctions are in effect.|
individual holding inactive status shall abide by the following conditions:
|(4)||Any practice of registered interior design services while holding an inactive license shall be considered unlicensed practice and is subject to disciplinary action.|
|(5)||Any individual holding inactive status is not subject to the biennial renewal fee or the professional development requirements.|
|(6)|| An individual may
apply to have an inactive license reactivated by submitting the following
|(7)||Reactivation of a license is at the sole discretion of the Board.|
|(1)||Every holder of a certificate of registration shall secure a SEAL of the design shown below, which shall be imprinted on all documents prepared by the Registered Interior Designer or prepared under his responsible control, or which is a prototypical document for which the Registered Interior Designer of Record is assuming professional responsibility as allowed by this Chapter. The SEAL shall be imprinted on each drawing, imprinted on the cover and index pages identifying all specifications covered by the index pages and imprinted on all other documents of service as well. For all documents of service to be submitted for the purpose of obtaining a building permit or for any other requirement as set forth by law, the registered interior designer's signature shall be original, in permanent blue ink, with the issue date and purpose appropriately identified on the document.|
|(2)||Nothing in these rules shall preclude the use of a seal electronically applied to the document; however, to restrict electronic access to his seal, the Registered Interior Designer of record may elect, for all documents subsequently issued, to substitute for his seal the following notation "These documents have been properly sealed and signed by (named) Registered Interior Designer of record. Original permitted sets of these documents are on file with (name of permitting authority) and are kept at the job site."|
|(3)||All subsequent revisions to the documents shall be made under the responsible control of the Registered Interior Designer of record and when so noted shall be considered the same as those originally signed, sealed and dated.|
|(4)||The SEAL shall serve to identify the Registered Interior Designer as the author or person in responsible control of the preparation of all drawings, specifications, and other document and as the Registered Interior Designer of Record.|
|(5)||The SEAL in this context means the personal, professional SEAL of a Georgia Registered Interior Designer certified under Code Chapter 43-4 to use the title Registered Interior Designer. A SEAL containing a firm name or a corporate name is not acceptable under this paragraph.|
|(6)||An Registered Interior Designer shall not affix, or permit to be affixed, his SEAL or his name to any drawing, specification, or other document as an Registered Interior Designer unless holding at the time a current certificate of registration in the State of Georgia.|
|(7)||The improper use of the SEAL or permitting the improper use thereof is ground for discipline of a licensee. Any person not licensed who improperly uses the SEAL of another is subject to the sanctions available under Code Chapter 43-4.|
|(8)|| Description of SEAL: The SEAL shall
contain the NAME of the Registered interior designer, his CERTIFICATE NUMBER
and shall contain the words GEORGIA REGISTERED INTERIOR DESIGNER - STATE OF
GEORGIA, all in accordance with the sample shown below.
The SEAL shall comply in all respects with the sample below, including size and format.
It shall be 1 ¾" x 1 ¾" inches square, with a 1/16" thick border of and a corner radius of ¼ ", with type font and size as indicated: State of Georgia/Arial black, 7 pt; Registered Interior Designer/ Arial black, 7pt.; Name/ Arial; Certificate Number/ Arial, 7 pt. each to be 1/16" high. The SEAL shall be of a type, which will make an impression by rubber stamp on the surface of the document to which it is applied.
SAMPLE OF SEAL